How to solder copper pipe and tubing like the pros. Tips, tricks, and techniques on getting a leak free professional solder joint. A complete guide on how to clean, flux, and solder plumbing copper.
Steps to remember:
1) Start with a water free dry connection 2) Clean both the fitting end and tubing end 3) Deburr the copper tube 3) Apply a thin layer of flux to both the fitting end and tubing end 4) Heat the fitting end evenly (remember the solder will follow the heat) 5) Use the copper to melt the solder, not the torch's flame 6) Wipe down and inspect the finished joint
๐ฆ๐๐ฝ๐ฝ๐ผ๐ฟ๐ Want to support my channel or give back? Help me improve on these DIY videos by making a financial contribution. All contributions no matter how small are greatly appreciated! https://ko-fi.com/prosdiy Thank you!
Disclosure: Pros DIY is an Amazon Associate. We earn a small commission from qualifying purchases through our affiliate links at no additional cost to you.
Videos produced by Pros DIY (https://www.prosdiy.com) are provided for informational purposes only. Please check with all national, state, provincial, and local codes and regulations before attempting any work. Pros DIY does not assume any responsibility or liability for any damage or injury from the information provided in our videos. Please hire a licensed, certified, professional.
